Recirculation Door Replacement

RECIRCULATION DOOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the HVAC Module.




2. Remove the recirculation housing screws.
3. Remove the recirculation housing.
4. Remove the door from the housing.

INSTALLATION PROCEDURE
1. Install the door into the housing.




2. Install the recirculation housing to the module.
3. Install the recirculation housing screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

4. Install the HVAC module.