Blower Motor Replacement - Auxiliary
BLOWER MOTOR REPLACEMENT - AUXILIARYREMOVAL PROCEDURE
1. Remove the center console.
2. Disconnect the rear blower motor assembly electrical connectors.
3. Disconnect the air ducts from the rear blower motor.
4. Remove the rear blower motor retaining bracket nuts.
5. Remove the bolts retaining the rear blower bracket to the IP.
6. Remove the rear blower motor retaining bracket studs.
7. Remove the rear blower motor insulator from under the rear blower motor assembly.
8. Push the rear blower motor assembly down.
9. Push the rear blower motor assembly forward in order to disengage the rear air duct.
10. Remove the rear blower motor assembly from the passenger side of console.
INSTALLATION PROCEDURE
1. Install the rear blower to its original position.
2. Engage the rear air duct.
3. Install the rear blower motor insulator under the rear blower motor assembly.
4. Install the rear blower motor retaining bracket studs.
5. Install the bolts retaining the rear blower bracket to the IP.
6. Install the rear blower motor retaining bracket nuts.
7. Connect the air duct to the rear blower motor.
8. Connect the rear blower motor assembly electrical connectors.
9. Install the center console.