Tail Lamp: Description and Operation

PARK, TAIL, LICENSE AND MARKER LAMPS

The park, tail, license and marker lamps are turned on when the headlamp switch is placed in the PARK LAMP or HEADLAMP position or anytime the headlights are requested. The park lamps are also turned ON with the front fog lamps. When the ignition switch is in the ON position, the DIM provides battery positive voltage to the controlled positive voltage circuit of the PRK LP relay coil. The rear fuse block supplies battery positive voltage to the switch contacts of the PRK LP relay. When the headlamp switch is in the PARK LAMP or the HEADLAMP position, the signal circuit of the park lamp switch of the DIM has ground at G200. In response to this signal, the DIM provides ground to the control circuit of the PRK LP relay coil, which energizes the relay coil. This closes the relay switch contacts. Current flows from the PRK LP relay to the LP PK L fuse and to the LP PK R fuse. From the fuse, the current flows to the park lamps. The park lamps are grounded at G401 and G402. The DIMR fuse supplies battery positive voltage to the license lamps and to the DIM park lamp input, for interior lamps dimming. The license lamps are grounded at G402.