Removal and Replacement

Accessory Power Receptacle Replacement - 12 Volt

Removal Procedure





1. Remove the right console side trim panel. Refer to Console Trim Panel Replacement - Right (Console Trim Panel Replacement - Right).
2. Disconnect the auxiliary power outlet electrical connector (1).
3. Unscrew the retainer (3) from the outlet.
4. Slide the outlet from the trim panel.



Installation Procedure





1. Slide the outlet into the hole in the trim panel.
2. Screw the retainer (3) onto the outlet.
3. Connect the auxiliary power outlet electrical connector (1).
4. Install the right console side trim panel. Refer to Console Trim Panel Replacement - Right (Console Trim Panel Replacement - Right).