Accessory Power Receptacle Replacement - 12 Volt
ACCESSORY POWER RECEPTACLE REPLACEMENT - 12 VOLTREMOVAL PROCEDURE
1. Remove the right console side trim panel.
2. Disconnect the auxiliary power outlet electrical connector (1).
3. Unscrew the retainer (3) from the outlet.
4. Slide the outlet from the trim panel.
INSTALLATION PROCEDURE
1. Slide the outlet into the hole in the trim panel.
2. Screw the retainer (3) onto the outlet.
3. Connect the auxiliary power outlet electrical connector (1).
4. Install the right console side trim panel.