Cabin Ventilation Grille: Service and Repair

Pressure Relief Valve Replacement

Removal Procedure

1. Remove the left rear compartment trim panel. Refer toRear Compartment Trim Panel Replacement (Rear Compartment Trim Panel Replacement) .
2. Remove the rear bumper fascia extension. Refer toRear Bumper Fascia Extension Replacement (Rear Bumper Fascia Extension Replacement)




3. From inside the rear compartment , press the retaining tabs while pushing outward in order to release the pressure relief valve from the quarter panel.



Installation Procedure





1. Position the pressure relief valve to the opening in the rear quarter panel.
2. Press inward on the pressure relief valve until the retaining tabs engage in order to secure the pressure relief valve to the rear quarter panel.
3. Install the rear bumper fascia extension. Refer toRear Bumper Fascia Extension Replacement (Rear Bumper Fascia Extension Replacement)
4. Install the left rear compartment side trim. Refer toRear Compartment Trim Panel Replacement (Rear Compartment Trim Panel Replacement) .