Bucket Seat Replacement

Bucket Seat Replacement

Removal Procedure

Caution: Refer toSIR Caution in Cautions and Notices.
1. Disable the SIR System. Refer toSIR Disabling and Enabling for driver's seat orSIR Disabling and Enabling for passenger seat in SIR.




2. Move the front seat forward in order to access the front seat track trim cover (1).
3. Remove the seat track trim cover (1) from the seat track.




4. Remove the seat track fasteners from the seat track.




5. Disconnect the seat electrical connectors (1).
6. With the aid of an assistant, remove the seat from the vehicle.



Installation Procedure

1. With the aid of an assistant, install the seat into the vehicle.




2. Insert the front tabs (1) on the seat track into the floor.




3. Connect the electrical connectors (1).





Notice: Refer toFastener Notice in Cautions and Notices.

4. Install the seat track fasteners.

Tighten the seat track fasteners to 30 Nm (22 lb ft).





5. Install the seat track trim covers (1).
6. Enable the SIR System. Refer toSIR Disabling and Enabling for driver's seat orSIR Disabling and Enabling for passenger seat in SIR.