Antilock Brakes / Traction Control Systems
Schematic and Routing DiagramsImportant:
Twisted-pair wires provide an effective shield that helps protect sensitive electronic components from electrical interference. If the wires were covered with shielding, install new shielding.
In order to prevent electrical interference from degrading the performance of the connected components, you must maintain the proper specification when making any repairs to the twisted-pair wires shown :
^ The wires must be twisted a minimum of 10 turns per 31 cm (12 inch) as measured anywhere along the length of the wires
^ The outside diameter of the twisted wires must not exceed 6.0 mm (0.25 inch)
ABS Schematics
Power, Ground, Serial Data and DIC
Vehicle Stability Enhancement System (JL4)
BPP Sensor, Switches and Indicators 2.6L/3.2L/3.6L (LY9/LA3/LY7)
BPP Sensor, Switches and Indicators 5.7L (LS6)
Wheel Speed Sensors and Variable Effort Steering Actuator
