60. Intake Plenum Manifold Assemble

Intake Plenum Manifold Assemble






Notice: Install the vacuum brake booster fitting from the intake plenum.

1. Tighten the vacuum brake booster fitting to 25 Nm (18 ft. lbs.).





2. Install the intake plenum tuning valve, intake plenum tuning solenoid and O-ring.
3. Install the intake plenum tuning valve bolts.
Tighten the intake plenum tuning valve bolts to 8 Nm (71 inch lbs.).
4. Install the intake plenum tuning solenoid bolts.
Tighten the intake plenum tuning solenoid bolts to 8 Nm (71 inch lbs.).