68. Engine Block Assemble - With KA3

Engine Block Assemble (with KA3)





1. Install the blow-by plate.

Notice: Install the blow-by plate bolts.

2. Tighten the blow-by plate bolts to 8 Nm (71 inch lbs.).





3. Install the O-ring onto the block heater.
4. Install the block heater.
Tighten the block heater to 60 Nm (44 ft. lbs.).





5. Apply thread sealant GM P/N 12346004 (Canadian P/N 10953480) to the threads of the coolant jacket plugs.
6. Install the coolant jacket plugs.
Tighten the coolant jacket plugs to 65 Nm (48 ft. lbs.).