82. Cylinder Head Installation - Right
Cylinder Head Installation - RightTools Required
^ J36660-A Torque Angle Meter
1. Install the new cylinder head gasket with the imprint toward the top and facing toward you.
2. Install the cylinder head to the engine block.
Important: Use new cylinder head bolts. The required tightening method stretches the bolts, therefore the cylinder head bolts are not reusable.
3. Install the new cylinder head bolts.
^ Tighten the cylinder head bolts to 25 Nm (18 ft. lbs.) on the first pass.
^ Tighten the cylinder head bolts 90 degrees using the J36660-A.
^ Tighten the cylinder head bolts 90 degrees using the J36660-A.
^ Tighten the cylinder head bolts 90 degrees using the J36660-A.
^ Tighten the cylinder head bolts 15 degrees using the J36660-A.