88. Timing Belt Rear Cover Installation

Timing Belt Cover Installation - Rear





1. Install the right side knock sensor.

Notice: Install the right side knock sensor bolt.

2. Tighten the right side knock sensor bolt to 20 Nm (15 ft. lbs.).





3. Install the left side knock sensor.
4. Install the left side knock sensor bolt.
Tighten the left side knock sensor bolt to 20 Nm (15 ft. lbs.).





5. Install the timing belt rear cover.
6. Install the knock sensor wires.
7. Apply thread adhesive GM P/N 12345382, (Canadian P/N 10953489), to the timing belt rear cover bolts and threaded pin.
8. Install the timing belt rear cover bolts.
Tighten the timing belt rear cover bolts to 8 Nm (71 inch lbs.).
9. Install the timing belt rear cover threaded pin.
Tighten the timing belt rear cover threaded pin to 10 Nm (89 inch lbs.).