Inlet Hose

Radiator Hose Replacement - Inlet (LA3, LY9)

Tools Required
^ J38185 Hose Clamp Pliers

Removal Procedure





1. Partially drain the cooling system.
2. Position the J38185 to the clamp in order to remove the inlet hose (1) from the radiator.
3. Position the J38185 to the clamp in order to remove the hose (2) from the engine.
4. Remove the inlet hose.

Installation Procedure





1. Install the radiator inlet hose into the vehicle with the mark in the top position.
2. Position the J38185 to the clamp in order to connect the hose (2) to the engine.
3. Position the J37097-A to the clamp in order to connect the hose (1) to the radiator.
4. Fill the cooling system.