C0267

DTC C0267

Circuit Description
The brake fluid level switch monitors the level of brake fluid in the master cylinder. When the IPC sees the brake fluid level switch input grounded, it turns ON the red Brake indicator and sends a serial data message to the EBCM that tells the EBCM that the brake fluid level is low.

Conditions for Running the DTC
The ignition is ON.

Conditions for Setting the DTC
Low brake fluid is detected for 2 seconds.

Action Taken When the DTC Sets
The red Brake warning indicator turns ON.

Conditions for Clearing the DTC
^ The condition for the DTC is no longer present and the DTC is cleared with a scan tool.
^ The Electronic Brake Control Module (EBCM) automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.

Diagnostic Aids

Steps 1 - 10:

Inspect the master cylinder reservoir for the proper brake fluid level.