Theft Deterrent Alarm Replacement
THEFT DETERRENT ALARM REPLACEMENTREMOVAL PROCEDURE
1. Remove the right rear compartment trim.
2. Remove the nuts securing the theft deterrent alarm (1) to the vehicle body.
3. Disconnect the electrical connector (3) from the alarm.
4. Remove the alarm from the vehicle.
INSTALLATION PROCEDURE
1. Reconnect the electrical connector (3) to the alarm.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the alarm onto the vehicle.
Tighten
Tighten the nuts to 9 N.m (80 lb in).
3. Install the rear compartment trim.