Radio Setup

RADIO SETUP

RADIO THEFT PROCEDURE
Complete the following procedure, using a scan tool, in order to properly set up communication:
1. At the Main Menu screen, select: Diagnostics.
2. At the Vehicle Identification screen, select the following options:
- Model Year
- Passenger Car
3. At the Vehicle Identification screen, select the appropriate model
4. At the System Selection Menu screen, select: Body
5. At the Body Screen, select: Radio.
6. At the Radio screen, select: Special Functions.
7. At the Special Functions screen, select: VIN Relearn.
8. At the VIN Relearn screen, the scan tool will display "Do you want to clear radio theft information?"
9. To begin clearing, press the soft touch key on the top right of the scan tool. The scan tool will display "Clearing Radio Theft in Progress."
10. Press EXIT on the scan tool and cycle the ignition.

IMPORTANT: The radio theft will learn the VIN. Without learning the VIN, the radio will display a locked message (LOC or LOCKED).

OPTION CONFIGURATION

IMPORTANT: Do not perform this procedure for the navigation radio.

Complete the following procedure, using a scan tool, in order to properly set up communication:
1. At the Main Menu screen, select: Diagnostics.
2. At the Vehicle Identification screen, select the following options:
- Model Year
- Passenger Car
3. At the Vehicle Identification screen, select the appropriate model
4. At the System Selection Menu screen, select: Body
5. At the Body Screen, select: Radio.
6. At the Radio screen, select: Special Functions.
7. At the Special Functions screen, select: Set Options.
8. Select optional modules then select the continue soft key.
9. Using the arrows, highlight the optional module, press enter, and then select the save soft key.
10. Press EXIT on the scan tool and cycle the ignition.