Procedures

HEATED SEAT CONTROL MODULE REPLACEMENT - FRONT

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions




1. Remove the front seat cushion.
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the heated seat control module and install the retaining screws (2).

Tighten
Tighten the screws to 2 N.m (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion.