Seat Back Cover and Pad Replacement - Rear
SEAT BACK COVER AND PAD REPLACEMENT - REARREMOVAL PROCEDURE
1. Remove the seat back.
2. Remove the head restraints.
3. Remove the armrest.
4. Remove the head restraint retainers.
5. Remove J channels retaining the seat back cover (1) to the seat frame.
6. Pull the seat back cover (1) and the cushion (2) from the frame.
7. Remove the seat cover from the seat foam pad.
INSTALLATION PROCEDURE
1. Position the seat back cover to the foam pad.
2. Position the foam cushion (2) and pad to the seat back frame.
3. Work the cover edges over the foam cushion.
4. Install the J channels to retain the rear seat back cover and foam pad to the seat back frame.
5. Install the armrest.
6. Use the following procedures if the seat back is equipped with center head restraints:
- Align the head restraint mounting holes with the seat covers.
- Cut holes in the seat back cover in order to install the head restraint retainers
7. Install the head restraint retainers.
8. Install the seat back.
9. Install the head restraints.