Fastener Tightening Specifications

TORQUE SPECIFICATIONS

For Torque Sequences regarding Main Bearing Cap, refer to service Procedure. Service and Repair

Crankshaft Main Bearing Bolt
Inner
First Pass 20 Nm (15 ft. lbs.)
Final Pass 80 degrees
Outer
First Pass 15 Nm (10 ft. lbs.)
Final Pass 110 Degrees
Side
First Pass 30 Nm (22 ft. lbs.)
Final Pass 60 Degrees
Crankshaft Balancer Bolt
First Pass 100 Nm (74 ft. lbs.)
Final Pass 150 Degrees