110. Camshaft Position Actuator Installation - Right Intake
Camshaft Position (CMP) Actuator Installation - Right Intake1. Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in Service Precautions.
Use an open wrench on the hex cast into the camshaft in order to prevent camshaft rotation when tightening the camshaft position actuator bolt.
2. Install the right intake camshaft position actuator.
3. Notice: Install the camshaft position actuator bolt.
Tighten the camshaft position actuator bolt to 58 Nm (43 ft. lbs.).