134. Engine Flywheel Installation

Engine Flywheel Installation

Tools Required
^ EN 46106 Engine Flywheel Holding Tool
^ J45059 Angle Meter

1. Place the engine flywheel in position on the crankshaft.
2. Install 2 NEW bolts in location at the top and bottom of the engine flywheel bolt pattern allowing the engine flywheel to hang in position.





3. Install the EN 46106.






4. Notice: Install the remaining NEW engine flywheel bolts.

1. Tighten the NEW engine flywheel bolts to 30 Nm (22 ft. lbs.).
2. Tighten the NEW engine flywheel bolts an additional 45 degrees using the J45059.