Fog/Driving Lamp: Service and Repair
FOG LAMP REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the front air deflector.
2. Disconnect the electrical connector (1).
3. Remove the fasteners that secure the front fog lamp assembly to the front fascia.
4. Remove the front fog lamp assembly from the vehicle.
INSTALLATION PROCEDURE
1. Install the front fog lamp assembly from the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners to secure the front fog lamp assembly to the front fascia.
Tighten
Tighten the fog lamp fasteners to 2 N.m (18 lb in).
3. Connect the electrical connector (1) to the fog lamp assembly.
4. Install the front air deflector.