Turn Signals: Service and Repair

REPEATER LAMP REPLACEMENT

REMOVAL PROCEDURE
1. Remove the front wheelhouse liner.
2. Push on the rear of the lamp assembly towards the front of the vehicle in order to disengage the lamp from the fender.
3. Remove the repeater lamp from the front fender.
4. Disconnect the lamp socket from the repeater lamp.

INSTALLATION PROCEDURE
1. Connect the lamp socket to the repeater lamp.
2. Install the repeater lamp to the front fender.
3. Press the rear of the repeater lamp in order to engage the tab with the front fender.
4. Install the wheelhouse liner.