Sunroof / Moonroof Module: Service and Repair
SUNROOF CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Lower the rear of the headliner to gain access to the sunroof control module. Refer to Headliner Replacement in Interior Trim.
2. Cut the tie strap securing the electrical harness to the drive cable tube.
3. Depress the tab (3) on the forward side of the sunroof control module (1).
4. With the lock tab (3) depressed, slide the sunroof control module towards the sunroof actuator in order to release the control module from the sunroof module assembly.
5. Disconnect the 2 electrical connectors.
6. Remove the sunroof control module from the sunroof module assembly.
INSTALLATION PROCEDURE
1. Connect the 2 electrical connectors to the sunroof control module.
2. Position the sunroof control module tabs (2) into the sunroof module assembly slots (3).
3. Slide the sunroof control module away from the sunroof actuator until the lock tab is fully engaged.
4. An audible click should be heard when the control module is secure to the sunroof module assembly.
5. Secure the electrical harness to the drive cable tube with a new tie strap.
IMPORTANT: Test for proper operation of the sunroof before installing the headliner.
6. Install the headliner.