Fastener Tightening Specifications

TORQUE SPECIFICATIONS




Left




Right

Cylinder Head Bolt - M8
First Pass 15 Nm (11 lb ft)
Final Pass 75 degrees
Cylinder Head Bolt - M11
First Pass 30 Nm (22 lb ft)
Final Pass 150 degrees

Camshaft
Camshaft Cap Bolt 10 Nm (89 inch lbs.)
Camshaft Intermediate Drive Sprocket Bolt - Idler Sprocket 58 Nm (43 ft. lbs.)

Intake Manifold
Brace Bolt - Engine Front Cover M12 65 Nm (48 ft. lbs.)
Brace Bolt/Ball Stud - Intake Manifold M6 10 Nm (89 inch lbs.)
Sight Shield Ball Stud 9 Nm (80 inch lbs.)
Tuning Valve Bolt 10 Nm (89 inch lbs.)
Upper-to-Cylinder Head Bolt - Long 23 Nm (17 ft. lbs.)
Upper-to-Cylinder Head Bolt - Short 23 Nm (17 ft. lbs.)
Upper-to-Lower Intake Manifold Bolt 23 Nm (17 ft. lbs.)

Exhaust Manifold
Bolt 20 Nm (15 ft. lbs.)
Heat Shield Bolt 10 Nm (89 inch lbs.)