TV Antenna Module Replacement (With RPO Code UE7)

TV ANTENNA MODULE REPLACEMENT (WITH RPO CODE UE7)

REMOVAL PROCEDURE
1. Remove the passenger side sail panel.




2. Disconnect the electrical wiring and coaxial cables (1, 4, 5) from the TV antenna module (3).
3. Remove the TV antenna module fasteners (2).
4. Remove the TV antenna module (3) from the vehicle.

INSTALLATION PROCEDURE




1. Install the TV antenna module (3) and fasteners (2).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the TV antenna module (3) fasteners (2) to 9 N.m (80 lb in).

2. Connect the electrical wiring and coaxial cables (1, 4, 5) to the TV antenna module (3).
3. Install the passenger side sail panel.