Memory Positioning Module: Service and Repair

MEMORY SEAT CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.




1. Remove the driver side front seat cushion assembly.
2. Remove the driver side seat trim panel.
3. Disconnect the electrical connectors from the memory seat control module (2).
4. Remove the fasteners (3) that retain the memory seat control module to the drivers side seat trim panel.
5. Remove the module from the driver side seat trim panel.

INSTALLATION PROCEDURE




1. Install the memory seat control module (2) to the driver side seat trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (3) that retain the memory seat control module to the driver side seat trim panel.

Tighten
Tighten the fasteners to 2 N.m (18 lb in).

3. Connect the electrical connectors to the memory seat control module.
4. Install the driver side seat trim panel.
5. Install the driver side front seat cushion assembly.
6. Calibrate the seat. Refer to Memory Seat Calibration Procedure.