Seat Adjuster Replacement - Front

Seat Adjuster Replacement - Front

Removal Procedure





Caution: Refer toSIR Caution in Cautions and Notices.
1. Remove the front bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .
2. Remove the front seat cushion. Refer to Seat Cushion Replacement - Front (Seat Cushion Replacement - Front) .
3. Remove the seat back frame. Refer to Seat Back Frame Replacement - Front (Seat Back Frame Replacement - Front) .



Installation Procedure





1. Transfer any remaining seat components to the new adjuster assembly:

* The seat adjuster motors (1,3,5). Refer to Seat Adjuster Motor Replacement (Seat Adjuster Motor Replacement) .
* The adjuster cables / sensors (2,4). Refer to Drive Cable Replacement - Power Seat (Service and Repair) .
* The wiring
* The clips

2. Install the front seat cushion. Refer to Seat Cushion Replacement - Front (Seat Cushion Replacement - Front) .
3. Install the seat back frame to the seat adjuster. Refer to Seat Back Frame Replacement - Front (Seat Back Frame Replacement - Front) .
4. Install the front bucket seat. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .
5. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration Procedure. Service and Repair