Radiator Cooling Fan Motor: Service and Repair
Cooling Fan Motor Replacement- ElectricRemoval Procedure
1. Remove the cooling fan assembly.
Important: The fan blade retaining nut is left hand thread, damage may occur to motor threads if attempting to remove as a right hand thread nut.
2. Remove the fan blade retaining nut (5) from the cooling fan motor (2).
3. Remove the fan blade (4) from the cooling fan motor shaft.
4. Remove the cooling fan motor retaining screws (3).
5. Remove the cooling fan motor (2) from the shroud (1).
Installation Procedure
1. Install the motor (2) to the shroud (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the motor retaining screws (3).
^ Tighten the electric cooling fan motor mounting screws to 6 Nm (53 inch lbs.).
3. Install the fan blade (4) to the motor shaft.
4. Install the fan blade retaining nut (5) to the motor (2).
^ Tighten the electric cooling fan blade retaining nut to 6 Nm (53 inch lbs.).
5. Install the cooling fan assembly.