Removing Engine Support Fixture
Removal Procedure1. Remove the J 28467-B.
2. Remove the J 42478.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the two rearward strut bolts to the right and left strut towers.
^ Tighten the strut tower bolts to 60 Nm (44 ft. lbs.).
4. Install the upper filler panel.
5. Install the air inlet grill.
6. Remove the J 42504 from the cylinder head.
7. Install the bolt bracing the power steering return hose to the cylinder head.
^ Tighten the power steering return hose retaining bolt to 50 Nm (37 ft. lbs.).