Acceleration/Deceleration Sensor: Service and Repair

Lateral Accelerometer Replacement

Removal Procedure





1. Turn OFF the ignition.
2. Remove the rear seat cushion.
3. Disconnect the lateral accelerometer sensor electrical connector (2).
4. Remove the 2 lateral accelerometer sensor screws (3).
5. Remove the lateral accelerometer sensor (1).

Installation Procedure





1. Install the lateral accelerometer sensor (1).

Notice: Refer to Fastener Notice.

2. Install the 2 lateral accelerometer sensor screws (3).
^ Tighten the 2 lateral accelerometer sensor screws to 2.4 Nm (21 inch lbs.).
3. Connect the lateral accelerometer sensor electrical connector (2).
4. Install the rear seat cushion.
5. Perform the ABS Diagnostic System Check.