Glove Box Lamp Switch: Service and Repair

INSTRUMENT PANEL (I/P) COMPARTMENT LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel (IP) storage compartment.
2. Disconnect the electrical connector (2) from the IP storage compartment lamp switch (1).




3. Remove the IP storage compartment lamp switch (1) from the IP storage compartment, by squeezing the tabs on both sides of the switch (1) and pulling the IP storage compartment lamp switch (1) out of the opening.

INSTALLATION PROCEDURE




1. Install the IP storage compartment lamp switch (1) to the IP storage compartment.




2. Connect the electrical connector (2) to the IP storage compartment lamp switch (1).
3. Install the IP compartment.