Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring

Turn Signal Cancel Cam and Steering Shaft Upper Bearing Spring Replacement

^ Tools Required
- J 23653-SIR Steering Column Lock Plate

Removal Procedure

Caution: Refer to SIR Caution. Vehicle Damage Warnings





1. Disable the SIR system.
2. Remove the SIR coil.
3. Using J23653-SM remove the bearing retainer (1).





4. Remove the shaft lock shield assembly (1).
5. Remove the turn signal cancel cam assembly (2).
6. Remove the upper bearing spring (3).

Installation Procedure





1. Install the upper bearing spring (3).
2. Install the turn signal cancel cam assembly (2).
3. Install the shaft lock shield assembly (1).





4. Install the bearing retainer onto J23653-SIR.
5. Using J 23653-SIR depress the shaft lock shield assembly.
6. Push the bearing retainer (1) into place.
7. Remove J23653-SIR from the steering shaft.
8. Install the SIR coil.
9. Enable the SIR system.