Seat Cushion Replacement - Rear
SEAT CUSHION REPLACEMENT - REARREMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Push in and up on the front of the rear seat cushion.
2. Lift upward on the seat cushion.
3. Disconnect the heated seat electrical connectors, if equipped.
4. Remove the seat cushion from the vehicle.
INSTALLATION PROCEDURE
1. Install the seat cushion into the vehicle.
2. Connect the heated seat electrical connectors.
3. Engage the 2 locator tabs on the seat bottom, under the seat back.
IMPORTANT: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.
4. Push down and rearward to seat the cushion into the latches in the #4 bar.