Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENTREMOVAL PROCEDURE
1. Remove the cruise control cable.
2. Disconnect the electrical connector from the cruise control module assembly (2).
3. Remove the nuts (3) and the bolt (1) from the cruise control module assembly (2).
4. Remove the cruise control module assembly (2).
5. Remove the fasteners (3) retaining the bracket (4) to the cruise control module (1).
6. Remove the cruise control module (1) from the mounting bracket (4).
INSTALLATION PROCEDURE
1. Install the cruise control module (1) on the mounting bracket (4).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners (3) which retain the bracket to the module.
Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).
3. Install the cruise control module assembly (2) to the body.
4. Install the 2 nuts (3) and the bolt (1).
Tighten
Tighten the nuts and the bolt to 9 N.m (80 lb in).
5. Connect the electrical connector to the cruise control module (1).
IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.
6. Install the cruise control cable.