Module Replacement - Seat Climate Control - Driver Side

MODULE REPLACEMENT - SEAT CLIMATE CONTROL - DRIVER SIDE

REMOVAL PROCEDURE
1. Remove the seat cushion.
2. Remove the driver side seat trim panel.




3. Disconnect the electrical connectors.
4. Remove the fasteners (4) from the climate control seat module (1).
5. Remove the climate control module.

INSTALLATION PROCEDURE




1. Install the climate control module.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (4) that connect the climate control seat module (1) to the driver side trim panel.

Tighten
Tighten the fasteners to 2 N.m (18 lb in).

3. Connect the electrical connectors.
4. Install the driver side seat trim panel.
5. Install the seat cushion.