Power Windows - Inoperative - Lockout Function

POWER WINDOWS INOPERATIVE - LOCKOUT FUNCTION

DIAGNOSTIC AIDS
A simple, momentary press of the lockout switch button is all thats necessary to activate the window lockout function. When the system has been activated, the LED indicator on the switch button will be illuminated. However, the scan tool parameter will only display Active while the switch button is being pressed. When the switch button is released, the parameter displayed will return to the Idle state regardless of whether or not the system has become active.

TEST DESCRIPTION

Step 1 - 3:

Step 4 - 9:

The numbers below refer to the step numbers on the diagnostic table.
3. This step determines if the DDM recognizes the lockout switch input.
4. This step determines if the indicator is operating properly.