Seat Cushion Replacement - Rear
SEAT CUSHION REPLACEMENT - REARREMOVAL PROCEDURE
1. Push in and up on the front of the rear seat cushion.
2. Lift up and out on the seat cushion.
3. Disconnect heated seat electrical connectors (if equipped).
4. Remove the rear seat cushion from the vehicle.
INSTALLATION PROCEDURE
1. Install the rear seat cushion into the vehicle.
2. Connect the heated seat electrical connectors (if equipped).
3. Engage two locator tabs into the wire loops in the bottom of the rear seat back.
4. Push down and rearward to seat the rear seat cushion into the latches in the number four bar.
IMPORTANT: Pull up on the front of the rear seat cushion to ensure that the cushion is secure.