Armrest Replacement - Rear Seat
ARMREST REPLACEMENT - REAR SEATREMOVAL PROCEDURE
1. Remove the rear seat back.
2. Disconnect the electrical connectors to the heated seat control module.
3. Remove the pass through access door assembly.
4. Remove the armrest retainers (1) from the armrest.
5. Remove the armrest.
INSTALLATION PROCEDURE
1. Install the armrest to the pass through assembly.
2. Install the armrest retainers (1).
3. Connect the electrical connectors to the heated seat control module (2).
4. Install the pass through access door assembly.
5. Install the rear seat back.