Dome Lamp: Service and Repair
DOME LAMP REPLACEMENTREMOVAL PROCEDURE
1. Remove the overhead console.
2. Remove the three screws from the lamp retainer.
3. Rotate the lamp retainer from right to left.
IMPORTANT: Care should be taken when rotating the lamp retainer not to snag or rip the flat wire harness.
4. Replace the inoperative bulb.
INSTALLATION PROCEDURE
1. Rotate the lamp retainer back into place.
IMPORTANT: Care should be taken when rotating the lamp retainer not to snag or rip the flat wire harness.
2. Install the three fasteners fully driven, seated, but not stripped.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the overhead console.