Park Brake Warning Lamp Switch Replacement (LHD)

Park Brake Warning Lamp Switch Replacement (LHD)

Removal Procedure





1. Remove the left front carpet retainer.
2. Disconnect the electrical connector from the park brake warning lamp switch.
3. Remove park brake warning lamp switch mounting bolt.
4. Remove park brake warning lamp switch.

Installation Procedure





1. Install the park brake warning lamp switch to the park brake lever assembly. Align the pin to the locator hole.

Notice: Refer to Fastener Notice in Service Precaution.

2. Install the park brake warning lamp switch mounting bolt.
^ Tighten the park brake warning lamp switch mounting bolt to 1.9 Nm (17 inch lbs.).
3. Connect the electrical connector to the park brake warning lamp switch.
4. Install the left front carpet retainer.