Accessory Power Receptacle Replacement - 12 Volt

ACCESSORY POWER RECEPTACLE REPLACEMENT - 12 VOLT

REMOVAL PROCEDURE




1. Remove the right console side trim panel.
2. Disconnect the auxiliary power receptacle electrical connector (1).
3. Unscrew the retainer (3) from the receptacle.
4. Slide the outlet from the trim panel.

INSTALLATION PROCEDURE




1. Slide the receptacle into the hole in the trim panel.
2. Screw the retainer (3) onto the receptacle.
3. Connect the auxiliary power outlet electrical connector (1).
4. Install the right console side trim panel.