Vanity Mirror Replacement

Vanity Mirror Replacement

Removal Procedure





1. Open the vanity cover (1) and use a thin flat-bladed tool to disengage the three front snap legs at the lower edge of the sunshade.
2. Remove the vanity by pulling it out and down.
3. Remove the wire connectors.



Installation Procedure





1. Connect the wire connectors.
Important: Ensure that the wires are routed correctly before installing the vanity into the sunshade.



2. Install the top of vanity into the sunshade.
3. Engage the snap legs (4) into the bottom of the sunshade.