Headlamp Switch: Service and Repair

HEADLAMP SWITCH REPLACEMENT (LHD)

REMOVAL PROCEDURE
The headlamp, foglamp switch assembly uses skin locks which grab the soft skin material of the IP. The skin lock feature may cause the switch to be hard to remove.
1. Remove left IP end cap.




2. Push on rear side of headlamp, fog lamp switch assembly.




3. Disconnect the electrical connectors.
4. Remove the headlamp switch.

INSTALLATION PROCEDURE




1. Connect electrical connectors.
2. Align headlamp, fog lamp switch assembly with opening in IP and push into position until flush with IP surface.
3. Install left IP end cap.