Fastener Tightening Specifications

Torque Specifications Part 1:

Torque Specifications Part 2:

Accumulator Housing Cover Bolt 8-14 Nm (6-10 lb ft)
Accumulator Housing to Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Bottom Oil Pan
First Pass 3 Nm (27 lb in)
Second Pass 6 Nm (53 lb in)
Third Pass 12 Nm (106 lb in)
Bottom Pan to Case Bolt 10-12 Nm (8-9 lb ft)
Case Cover to Case Bolt (10 mm) 20-27 Nm (15-20 lb ft)
Case Cover to Case Bolt (13 mm) 27-31 Nm (20-23 lb ft)
Case Cover to Case Stud (10 mm) 20-27 Nm (15-20 lb ft)
Case Cover to Case Stud (13 mm)(47) 27-31 Nm (20-23 lb ft)
Case Cover to Driven Sprocket Support Bolt 20-27 Nm (15-20 lb ft)
Case Extension to Case Bolt (10 mm) 20-27 Nm (15-20 lb ft)
Case Extension to Case Bolt (13 mm) 50-55 Nm (37-40 lb ft)
Case Extension to Case Stud 50-55 Nm (37-40 lb ft)
Case to Forward Clutch Support Stud 25-27 Nm (19-20 lb ft)
Channel Plate to Accumulator Housing Bolt 8-14 Nm (6-10 lb ft)
Channel Plate to Case Bolt 8-14 Nm (6-10 lb ft)
Channel Plate to Case Nut 8-14 Nm (6-10 lb ft)
Cooler Connector to Cooler - Case Cover 20-27 Nm (15-20 lb ft)
Detent Lever and Roller Assembly Bolt 8-14 Nm (6-10 lb ft)
Differential to Final Drive Carrier Bolt 70-76 Nm (52-56 lb ft)
Drive Sprocket Support to Case Bolt 11-13 Nm (8-9.5 lb ft)
Engine to Transmission Brace 47 Nm (35 lb ft)
Input Speed Sensor to Case Bolt 11-13 Nm (8-9.5 lb ft)
LCVB to Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Manual Shaft to Detent Lever Nut 27-34 Nm (20-25 lb ft)
Oil Drain-Bottom Pan to Case Cover Plug 8-14 Nm (6-10 lb ft)
Oil Pressure Test Plug 22 Nm (16 lb ft)
Oil Test - #40 TORX - Case Cover Plug 18-26 Nm (13.5-19 lb ft)
Oil Transfer Plate to Case Bolt 8-14 Nm (6-10 lb ft)
Pressure Control Solenoid Bracket to UCVB Bolt 11-13 Nm (8-9.5 lb ft)
Pump Assembly to Case Bolt 11-13 Nm (8-9.5 lb ft)
Pump Assembly to Case Cover Bolt 11-13 Nm (8-9.5 lb ft)
Return, Case, Cooler Connector 25-29 Nm (19-21 lb ft)
Scavenge Pump Cover to Scavenge Pump Body Bolt 11-13 Nm (8-9.5 lb ft)
Scavenge Tube to Case Bolt 8-14 Nm (6-10 lb ft)
Secondary Pump to Case Bolt 11-13 Nm (8-9.5 lb ft)
Secondary Pump to Case Cover Bolt 11-13 Nm (8-9.5 lb ft)
Servo Cover to Case Bolt 8-14 Nm (6-10 lb ft)
Shifter Assembly to Body Nut 9 Nm (79 lb in)
Shifter Cable Adjuster Nut 25 Nm (18 lb in)
Shifter Cable to Shifter Assembly Bolt 25 Nm (18 lb in)
Side Cover to Case Cover Bolt (13 mm) 20-27 Nm (15-20 lb ft)
Side Cover to Case Cover Bolt (15 mm) 50-55 Nm (37-40 lb ft)
Side Cover to Case Cover Stud 50-55 Nm (37-40 lb ft)
Spacer Plate Support to Channel Plate Bolt 8-14 Nm (6-10 lb ft)
Speed Sensor to Case Extension Bolt 8-14 Nm (6-10 lb ft)
Temperature Sensor 3.4 Nm (30 lb in)
Torque Converter Cover Bolts 12 Nm (106 lb in)
Transaxle Mount to Bracket Nut - Left 75 Nm (55 lb ft)
Transaxle Mount to Bracket Nut - Rear 40 Nm (30 lb ft)
Transaxle Mount Bracket to Transaxle Bolt - Left 50 Nm (37 lb ft)
Transaxle Mount Bracket to Transaxle Bolt - Rear 50 Nm (37 lb ft)
Transaxle Mount to Frame Bolt and Nut - Rear 50 Nm (37 lb ft)
Transaxle Mount to Frame Rail Nut - Left 70 Nm (52 lb ft)
UCVB to Case Bolt 11-13 Nm (8-9.5 lb ft)
UCVB to Case Cover Bolt 11-13 Nm (8-9.5 lb ft)
UCVB to Driven Sprocket Support Bolt 11-13 Nm (8-9.5 lb ft)