Camshaft Bearing

LEFT





Install the camshaft bearing cap bolts in sequence.
Alternately hand tighten the camshaft bearing cap bolts a few turns at a time until all caps are fully seated.

Tighten the camshaft bearing cap bolts to 5 Nm (44 inch lbs.).

Tighten the camshaft bearing cap bolts an additional 30 degrees using the J 45059.


RIGHT





Install the camshaft bearing cap bolts in sequence.
Alternately hand tighten the camshaft bearing cap bolts a few turns at a time until all caps are fully seated.

Tighten the camshaft bearing cap bolts to 5 Nm (44 inch lbs.).

Tighten the camshaft bearing cap bolts an additional 30 degrees using the J 45059.