Right Side Harness Connections Install

Right Side Harness Connections





1. Connect the engine wiring harness to the right side fuel injectors.





2. Connect the engine wiring harness to the right camshaft cover.





3. Connect the engine wiring harness to the right ignition coil harness.





4. Connect the engine wiring harness to the right camshaft position sensors.





5. Install the engine wiring harness ground to the fuel rail stud.
6. Install the engine wiring harness ground nut to the fuel rail stud.
^ Tighten the engine wiring harness ground nut to 8 Nm (71 inch lbs.).





7. Connect the engine wiring harness to the ECT sensor at the rear of the right cylinder head.





8. Connect the engine wiring harness to the air conditioning compressor.





9. Connect the engine wiring harness to the MAP sensor.





10. Connect the engine wiring harness to the knock and crankshaft position sensor wiring harness.





11. Connect the engine wiring harness to the oil level sensor.





12. Connect the engine wiring harness to the right oxygen sensor wiring harness.





13. Install the engine wiring harness bracket bolt to the engine block.
^ Tighten the engine wiring harness bracket bolt to 35 Nm (26 ft. lbs.).