Domestic and Europe Export

Scan Tool Data Definitions (Domestic and Europe Export)
Battery Voltage Signal: The scan tool displays 8-17 volts. The amount of battery voltage available at the remote control door lock receiver (RCDLR).
LF Tire Pressure: The scan tool displays 0 - 351.6 kPa (0 - 51 psi). The actual pressure of the left front tire.
LF Tire Pressure Sensor Status: The scan tool displays Failed or Normal. Failed indicates the RCDLR is not receiving transmissions from the left front tire pressure sensor. Normal indicates the RCDLR is receiving transmissions from the left front tire pressure sensor.
LR Tire Pressure: The scan tool displays 0 - 351.6 kPa (0 - 51 psi). The actual pressure of the left rear tire.
LR Tire Pressure Sensor Status: The scan tool displays Failed or Normal. Failed indicates the RCDLR is not receiving transmissions from the left rear tire pressure sensor. Normal indicates the RCDLR is receiving transmissions from the left rear tire pressure sensor.
Manual Tire Programming: The scan tool displays Active or Inactive. Active indicates the TPM system is in sensor programming mode. Inactive indicates the TPM system is not in the sensor programming mode.
RF Tire Pressure: The scan tool displays 0 - 351.6 kPa (0 - 51 psi). The actual pressure of the right front tire.
RF Tire Pressure Sensor status: The scan tool displays Failed or Normal. Failed indicates the RCDLR is not receiving transmissions from the right front tire pressure sensor. Normal indicates the RCDLR is receiving transmissions from the right front tire pressure sensor.
RF Tire Pressure: The scan tool displays 0 - 351.6 kPa (0 - 51 psi). The actual pressure of the right rear tire.
RR Tire Pressure Sensor Status: The scan tool displays Failed or Normal. Failed indicates the RCDLR is not receiving transmissions from the right rear tire pressure sensor. Normal indicates the RCDLR is receiving transmissions from the right rear tire pressure sensor.
Tire Pressure Sensor ID: The scan tool displays Valid or Invalid. Valid indicates all 4 of the sensors ID codes are valid. Invalid indicates that at least 1 of the sensors ID codes are invalid.