B0051
DTC B0051
CIRCUIT DESCRIPTION
The inflatable restraint sensing and diagnostic module (SDM) contains a sensing device that converts vehicle velocity changes into an electrical signal. The SDM compares this electrical signal to a value stored in memory. When the generated signal exceeds the stored value, the SDM performs additional signal processing and compares the generated signals to values stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the air bags and causing DTC B0051 to set.
DTC DESCRIPTOR
This diagnostic procedure supports the following DTC:
DTC B0051 Deployment Commanded
CONDITIONS FOR RUNNING THE DTC
Ignition 1 voltage is within the normal operating voltage range.
CONDITIONS FOR SETTING THE DTC
The DTC will set if one of the following conditions occurs:
- The SDM detects a frontal crash of sufficient force to warrant deployment of the frontal inflator modules.
- The SDM detects a side impact crash of sufficient force to warrant deployment of a side inflator module.
ACTION TAKEN WHEN THE DTC SETS
- The SDM commands the AIR BAG warning lamp ON via class 2 serial data.
- The SDM records crash data.
CONDITIONS FOR CLEARING THE DTC
DTC B0051 is a latched code. You cannot clear a latched code. Replace the SDM after following the instructions in the diagnostic table.
TEST
