114. Ignition Coil Module Installation - Left
Ignition Module Installation - Left
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the left spark plugs.
Tighten the spark plugs to 15 Nm (11 ft. lbs.).
2. Install the ignition coil assembly.
3. Install the ignition coil assembly bolts.
Tighten the ignition coil assembly bolts to 10 Nm (89 inch lbs.).
4. Install the jump start grounding bracket to the left cylinder head.
5. Install the jump start grounding bracket bolts to the left cylinder head.
Tighten the jump start grounding bracket bolts to 20 Nm (15 ft. lbs.).